+39.049769999
Login or register 1 ITA ENG ESP FRA

Ice Cream Cakes Moulds And Mousse Cakes Moulds

Ice cream cakes moulds and mousse cakes moulds

ICE CREAM DRESS FOR NEW BEAUTY

HOW TO USE THE MOULD decosil®
ICE CREAM AND MOUSSE CAKES
 

ICE CREAM CAKES

1. Follow the procedure working with silicone gloves and with the cold mould. Before use, place the silicone mould in a blast chiller or freezer and leave it for 20'.

For a optimizing result, speeding the production steps and for a better design definition (even after the delivery of the finished sweet) it is recommended to brush over the entire inner surface of the mould, a thin layer of coated chocolate (white, milk or dark chocolate not pre-crystallized) melted at 35-38° C. Then lay down the moulds brushed with chocolate in the freezer, or better in the blast chiller at -40° C.

SEMIFREDDO

1. To get a perfect result with our moulds, spread a thin shirt (approximately 1 cm) of parfait on the entire inner surface of the mould pressing firmly against the walls to avoid the formation of air bubbles. Place the moulds in a blast at -40° C for a few minutes. Alternatively, it is also possible for the parfait proceed as with the ice-cream cake, forming a thin layer of chocolate is not pre-crystallized over the entire inner surface of the mould.

2. Proceed to the assembly of the cake as usual, alternating layers of ice cream with Victoria sponge, meringues, crispy biscuits, sauces and toppings.

3.  After the assemblement, you position in the bottom layers of Victoria sponge, meringues, crispy cookies and let all stabilize in a blast chiller at -40° C until the complete hardening of the product. We advise you to place the moulds inside the chiller on the grids or perforated trays to accelerate mould's cooling.

4. When the cake is frozen, remove it from the mould proceeding as if you were "peeling a banana" turning the mould upside down. After the extraction, you replace the mould in the original form and proceed with the execution of another cake; using the mould already cold, processing time decreases.

New decorative techniques for ice-cream, confectionery, frozen confectionery, ice cream cakes, frozen desserts.

The decoration implements the aesthetic appearance of own handmade creations.

The right approach to increase and satisfy own customers.

Ice cream cakes mould decoration, moulds for decorating ice cream cakes and mousse cakes
Ice cream cakes mould decoration

53,00 +VAT
14508
single portion ice cream silicone mould
90,00 +VAT
14504
Moulds for ice-cream parlours
129,00 +VAT
14507
95,00 +VAT
14509
39,00 +VAT
14510
89,00 +VAT
1003
multiple mould 24 subjects
100,00 +VAT
56,00 +VAT
14506
Moulds for ice-cream parlours
100,00 +VAT
14501
Moulds for ice-cream parlours
90,00 +VAT
14502
28,00 +VAT
1017
kit 3 pcs.
57,00 +VAT
27,00 +VAT
1036
55,00 +VAT
25,00 +VAT
1037
59,00 +VAT
29,00 +VAT
1038
43,00 +VAT
14512
25,00 +VAT
1010
114,00 +VAT
14511
22,00 +VAT
1018
kit 3 pcs.
90,00 +VAT
14503
Moulds for ice-cream parlours
100,00 +VAT
14505
Moulds for ice-cream parlours
16,00 +VAT
12,00 +VAT
1002
135,00 +VAT
14400
8 subjects multiple mould

decosil® Srl
Via Risorgimento, 29
35010 Limena - Padova - Italia
Tel.  +39 049 769999
Fax. +39 049 8848069

C.F.  e P. Iva 04152410280

Reg. Imp. di: PD
Nr. Rea: PD 366437
Cap. Soc. €10.000 I.V.

2,42 sec. 
Top