LINEAGUSCIO Base for Pine Mould

LINEAGUSCIO^® Base for Pine mould
kit of 3 pieces

Step by Step

decosil^® leaves nothing to chence, adding to the pine of special support for packaging.

The base is a separated article and so it must be purchased separately.

To use the silicone moulds of LINEAGUSCIO^® (Bell, Pine, Sphere, Egg) is necessary to combine the thermoformed articles, consisting of 2 rigid parts needed to sustain the shells of silicone.

The Thermoformed is a separated article and so it must be purchased separately.

It is also interchangeble, so you can use all the shells of the same shape.

Code 12300 Thermoformed Pine kit 2 pz. 

The LINEAGUSCIO^® moulds are an exclusive patent decosil^®.

Type of mould: 1 side kit 3 pcs. 
Dimensions of the mould Big Disc mould: Diameter b 16 x h 1 cm
Dimensions of the mould Small Disc: Diameter b 13,5 x h 1 cm
Dimensions of the mould Cono: Diameter b 6,5 x h 4,3 cm
Dimensions of the subject Big Disc: Diameter b 13,5 x h 0,5 cm
Dimensions of the subject Small Disc: Diameter b 11 x h 0,5 cm
Dimensions of the subject Cono: Diameter B 5 - b 4 x h 3,7 cm
n° of objects per mould: 1
Weight of mould: around 0,313 kg.