Product successfully added!
LINEAGUSCIO® Base for Pine mould
kit of 3 pieces
Step by Step
decosil® leaves nothing to chence, adding to the pine of special support for packaging.
The base is a separated article and so it must be purchased separately.
To use the silicone moulds of LINEAGUSCIO® (Bell, Pine, Sphere, Egg) is necessary to combine the thermoformed articles, consisting of 2 rigid parts needed to sustain the shells of silicone.
The Thermoformed is a separated article and so it must be purchased separately.
It is also interchangeble, so you can use all the shells of the same shape.
Code 12300 Thermoformed Pine kit 2 pz.
The LINEAGUSCIO® moulds are an exclusive patent decosil®.
Type of mould: 1 side kit 3 pcs.
Dimensions of the mould Big Disc mould: Diameter b 16 x h 1 cm
Dimensions of the mould Small Disc: Diameter b 13,5 x h 1 cm
Dimensions of the mould Cono: Diameter b 6,5 x h 4,3 cm
Dimensions of the subject Big Disc: Diameter b 13,5 x h 0,5 cm
Dimensions of the subject Small Disc: Diameter b 11 x h 0,5 cm
Dimensions of the subject Cono: Diameter B 5 - b 4 x h 3,7 cm
n° of objects per mould: 1
Weight of mould: around 0,313 kg.
decosil® Srl
Via Risorgimento, 29
35010 Limena - Padova - Italia
Tel. +39 049 769999
Fax. +39 049 8848069
C.F. e P. Iva 04152410280
Reg. Imp. di: PD
Nr. Rea: PD 366437
Cap. Soc. €10.000 I.V.